Description
First Stage
- Satin plated brass body with heat exchanging ribs for maximum thermal performance.
- Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
- Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
- Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
- 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
- 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
- Double swivel hose for greater freedom of movement and comfort.
- Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
- DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively.
- Tested for Octopus use – EN250A to 60 metres cold water.
- Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.
2nd Stage
- Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places
- Ergonomic and simple to use venturi lever
- Oversize breathing effort adjuster makes adjustment easy in cold water whilst wearing gloves
- Large purge button
- Reversible second stage for either a left or right hand gas supply configuration
- A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe
- Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is supplied with both sets of exhaust tees
- Comfo-bite mouthpiece
- Flexible nylon braided hose, which has better cold water performance than traditional rubber hose
- Designed and manufactured in the UK
- No single use plastic in the packaging
SPECIFICATIONS:
Weight | DIN – 1.193 kg (2.63lbs) Yoke – 1.339 kg (2.95 lbs) |
Max working pressures | First Stage DIN – 300 bar (4351 psi) Yoke – 232 bar (3365 psi) Second Stage 9-10 bar (131-145 psi) |
Certified to: | EN250A |
Temp range | 0.5°C – 55°C |
Connections | DIN and Yoke |
Nitrox/Oxygen compatible | Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection. |
MTX-RC Octopus
The perfect octopus to complement your MTX-RC regulator
- Yellow highlights for visibility in an emergency
- Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places.
- Ergonomic and simple to use venturi lever.
- Oversize breathing effort adjuster makes adjustment easy in cold water whilst wearing gloves.
- Large purge button.
- Reversible second stage for either a left or right hand gas supply configuration.
- A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.